• Cree.com
  • Contact Cree
  • About Cree
  • Careers
  • News & Events

LED Street & Roadway LEDway® Series

 Outdoor lighting
LEDway<sup>®</sup> Series

LEDway Series Street & Roadway

Cree continues to raise the bar on performance and lower the total cost of ownership, delivering higher value to municipalities and facility managers. Industry-leading optical control and adjustable output for versatility and inventory management make the LEDway Series a perfect fit for a wide array of roadway applications, helping improve the economic value for DoTs, municipalities, or Investor Owned Utilities.
  • Limited Warranty: 10 years
  • Efficacy: Not available
  • Lumen Maintenance: Consult Spec Sheet
  • Lumen Output: Up to 24000 L
  • Wattage: 35 - 267 W

LEDway Series - Outdoor - LED Street and Roadway - Off

LEDway Series Street & Roadway

Overview

LEDway Series for roadway lighting expands the application range, replacing from 70W to 400W HPS. With industry-leading optimized optical control and adjustable output for versatility, the LEDway Series significantly improves the economic value for the end application.

Specs & Variations

Name OpticMountingLed CountSeriesVoltageColor OptionsDrive CurrentOptions
STR-LWY

2METype II Medium
2MBType II Medium w/ BLS
2SType II Short
3MType III Medium
4MType IV Medium
5MType V Medium
HTHorizontal Tenon
0220
0330
0440
0550
0660
0770
0880
0990
10100
11110
12120
E
UL120-277V
UH347-480V
BKBlack
BZBronze
SVSilver
525525mA
700700mA
DIM0-10V Dimming
RNEMA® Photocell Receptacle
UTLUtility
40K4000K CCT

* Ordering information is for reference only. Some product configurations are not available. Please consult spec sheets for specific product availability and for further details.

Features

  • Minimum 70 CRI
  • CCT: 3000K (+/- 300K) consult factory, 4000K (+/- 300K), 5700K (+/- 500K)
  • Patented NanoOptic® Technology
  • Exclusive DeltaGuard® Finish
  • UL wet listed
  • Meets CALTrans 611 Vibration Testing
  • Certified to ANSI C136.31-2001 3G Bridge and Overpass Vibration Standards
  • 10K surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
  • Field adjustable power conditions
  • Remote monitoring compatibility

Benefits

  • Improved illumination performance
  • Significant energy and maintenance savings
  • Eliminate the relamping cycle
  • Standard 10-year limited warranty

Warranty

LIMITED WARRANTY FOR CREE® LED LIGHTING FIXTURES

(INCLUDING BETALED® TECHNOLOGY; TRUEWHITE® TECHNOLOGY; AND ESSENTIA® FIXTURES)

This limited warranty is provided by the Cree company described below ("Seller") to you as the original purchaser of the LED lighting product that is identified on Seller's invoice reflecting its original purchase (the "Product"). The Seller is the Cree company identified as such on the invoice. This limited warranty may be transferred to subsequent purchasers of the Product, provided that such Product is resold in new condition and in its original packaging. Seller warrants that the Product, when delivered in new condition and in its original packaging, will be free of defects in material and workmanship for a period of TEN (10) YEARS from the date of original purchase. The determination of whether the Product is defective shall be made by Seller in its sole discretion with consideration given to the overall performance of the Product. A Product shall not be considered defective solely as a result of the failure of individual LED components to emit light if the number of inoperable components is less than 10% of the total number of LED components in the Product.

If Seller determines the Product is defective, Seller will elect, in its sole discretion, to refund you the purchase price of the Product, repair the Product or replace the Product. This limited warranty will not apply to loss or damage to the Product caused by: negligence; abuse; misuse; mishandling; improper installation, storage or maintenance; damage due to fire or acts of God; vandalism; civil disturbances; power surges; improper power supply; electrical current fluctuations; corrosive environment installations; induced vibration; harmonic oscillation or resonance associated with movement of air currents around the Product; alteration; accident; failure to follow installation, operating, maintenance or environmental instructions prescribed by Seller or applicable electrical codes; or improper service of the Product performed by someone other than Seller or its authorized service provider. This limited warranty excludes field labor and service charges related to the repair or replacement of the Product. THIS LIMITED WARRANTY IS VOID IF THE PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH IT IS DESIGNED.

Seller reserves the right to utilize new, reconditioned, refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part, as determined by Seller in its sole discretion, and warranted for the remainder of the original warranty period.

In order to make a warranty claim, you must notify Seller in writing within sixty (60) days after your discovery of the defect, provide proof of purchase such as the invoice and comply with Seller's other warranty requirements. Upon receiving that notice, Seller may require you to promptly return the Product to Seller, or its authorized service provider, freight prepaid. Your warranty claim should be addressed to Cree, Inc., 9201 Washington Avenue, Racine, WI 53406.

This limited warranty only applies to specified LED fixtures. Any warranties applicable to finish, poles, tenons, mounts, Cree® LED lamps, Cree® LED bulbs, Cree® LED T8 Series lamps, UR Series LED upgrade kits, CR Series LED troffers enabled with SMARTCAST™ Technology, CS Series linear luminaires enabled with SMARTCAST™ Technology, KR Series downlights enabled with SMARTCAST™ Technology, DR Series downlights, CR Series downlights, LR24™ troffers, certain BetaLED® Technology outdoor fixtures (specifically Class II as defined per IEC/EN60598), backup batteries, controls, occupancy sensors, photocells and other fixture accessories can be found at www.lighting.cree.com/resources/warranties.

THE FOREGOING WARRANTY PROVISIONS ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY AGAINST INFRINGEMENT AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL, COMPENSATORY, CONSEQUENTIAL, INDIRECT, SPECIAL OR OTHER DAMAGES. SELLER'S AGGREGATE LIABILITY WITH RESPECT TO A DEFECTIVE PRODUCT SHALL IN ANY EVENT BE LIMITED TO THE MONIES PAID TO SELLER FOR THAT DEFECTIVE PRODUCT.

This warranty is effective for purchases of Product on or after the effective date set forth below. Seller reserves the right to modify this warranty from time to time. Any modification of this warranty shall be effective for all orders placed with Seller on or after the effective date of such revised warranty.

Effective Date: October 30, 2014

IES Configurator

Documentation

Name

Last Updated

Spec Sheets

+ Open

Compatibility & Dimming

+ Open

Installation Instructions

+ Open

Accessories

Filter By:

Clear Filter X

Bird Spikes

XA-BRDSPK120

ORDER #

XA-BRDSPK120
Description XA-BRDSPK120

For use with 100 to 120 LED light engines. Designed to prevent birds from landing or setting up a nest on the luminaire.

External Backlight Control Shield

ORDER #

XA-XSLBLS120
Description XA-XSLBLS120

For use with 100 to 120 LED luminaires. Designed to control backlight - put the light where you want it and not where you don't.

PB Series Vertical Tenons

PB-2R

ORDER #

PB-2R
PB-3R

ORDER #

PB-3R
PB-4R

ORDER #

PB-4R
PB-1A

ORDER #

PB-1A

ORDER #

PB-2A

ORDER #

PB-3A
PB-4A(90)

ORDER #

PB-4A(90)
PB-4A(180)

ORDER #

PB-4A(180)

PT Series Horizontal Tenons

PT-1

ORDER #

PT-1
Description PT-1

Single - Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

WM Series Bracket

ORDER #

WM-2L
Interested?
Let's talk.

Talk to the Experts

Let us help you get started with our superior LED lighting products.

Where to Buy

Find a distributor or showroom near you to assist you with Cree LED Lighting products.

See It In Person

See why "Cree IS LED Lighting" at our Lighting Experience Centers.

Request a Tour
 

Tools

Use these handy online tools to get from point A to point Cree.

 

Service & Support

As dazzling as Cree® LED Lighting is, the back story will leave you feeling even more warm and fuzzy. Get it here.

 

Contact Our Experts

Got questions? Our peeps know the answers and are standing by. Pick an application, any application.

 

Tours & Events

There’s nothing like experiencing Cree® LED Lighting with your own eyes. Here’s where to find the joy.